Seal Welding Machine

Hartl Christian
5AAT

Naderhirn Jakob
5AAT

Oberngruber David
5AAT

Peer Markus
5AAT

Stockinger Thomas

Problem: The different seals for the window frames are automatically fed directly from the roll. Since the seals are ordered by roller, there is a beginning and an end of the seal. In order to keep the fully automated machine running, the end of the first roll must be connected to the beginning of the second roller.

Initial situation:  The retracting of the seal is automated, including a detection that stops when the sealing roller ends. In such a case, a worker is currently hand-connecting the seals. Here, both welding by heating mirror and gluing by second glue is a used variant. At the beginning, the sealing ends are cut off in both versions to ensure an optimal connection. When welding the seals, the sealing ends are brought to melting temperature, then held together and connected to them. During gluing, the intersections are wetted with second glue, then pressed together and thus connected. After that, the fully automated process can be continued.

Specifications of the Internorm: